Pagoda SL Group

W113 Pagoda SL Group => Drive train, fuel, suspension, steering & brakes => Topic started by: markatspace on July 26, 2024, 16:19:02

Title: autotrans gearbox mount -now not changing gears smoothly
Post by: markatspace on July 26, 2024, 16:19:02
1965 230SL auto.
I have just swapped out my autotrans gear box mount (over the tunnel) it had decayed, at the same time the prop flex disc looked rough so replaced that too.  When I drive the car now, the car holds onto gears for a long time. then when it does change up the change is really jerky and rough. all gears can be selected.  Any help or ideas please?
Title: Re: autotrans gearbox mount -now not changing gears smoothly
Post by: ja17 on July 27, 2024, 04:44:20
Check to see if the transmission linkage is not stuck. I am referring to the linkage going to the three position solenoid from the modulator.
Title: Re: autotrans gearbox mount -now not changing gears smoothly
Post by: markatspace on July 29, 2024, 12:34:35
thanks it was stuck. Now changed the angle of the gbox using the mount. much better. thank you!