Pagoda SL Group

W113 Pagoda SL Group => Drive train, fuel, suspension, steering & brakes => Topic started by: stickandrudderman on July 08, 2024, 12:43:43

Title: Throttle body basic setting
Post by: stickandrudderman on July 08, 2024, 12:43:43

https://youtu.be/s9pqlRglL0s?si=m56c1PmLof8hBmTJ (https://youtu.be/s9pqlRglL0s?si=m56c1PmLof8hBmTJ)

Title: Re: Throttle body basic setting
Post by: WRe on July 08, 2024, 14:34:45

Great, thank you Colin!

Title: Re: Throttle body basic setting
Post by: Sead on July 08, 2024, 15:07:21

If the lever has been removed from the axle and and all screws etc removed for overhaul, this is of no use. The exact assignment of the lever to the axle on TB and the opening angles of the throttle valve and the injection pump can only be determined using degree disks.

Title: Re: Throttle body basic setting
Post by: stickandrudderman on July 08, 2024, 17:14:57

Yes, Sead, but this video is not about that; it's simply to help people understand that the setting screw is not an idle speed screw.

Title: Re: Throttle body basic setting
Post by: Bshaunessy on July 08, 2024, 19:33:20

Colin Ferns
 Thx for the great and explanatory video…very helpful.

Title: Re: Throttle body basic setting
Post by: Pawel66 on July 08, 2024, 21:13:35

Thank you and please keep those shorts coming!

Title: Re: Throttle body basic setting
Post by: Kevkeller on July 08, 2024, 23:12:42

Yes thanks and I fully agree with Pawell.

Kevin

Title: Re: Throttle body basic setting
Post by: Sead on July 09, 2024, 07:25:14

Quote from: stickandrudderman on July 08, 2024, 17:14:57

Yes, Sead, but this video is not about that; it's simply to help people understand that the setting screw is not an idle speed screw.

;)