Pagoda SL Group

W113 Pagoda SL Group => Wanted To Buy => Topic started by: jonp821 on June 18, 2024, 16:07:29

Title: aluminum mounting bracket for power brake booster
Post by: jonp821 on June 18, 2024, 16:07:29

Greetings all---- I'm in need of the aluminum mounting bracket for the power brake booster for a 1971 280 sl w113.  It's the bracket that fits between the booster and the firewall.

Many thanks ---jon p

Title: Re: aluminum mounting bracket for power brake booster
Post by: Peter h on June 18, 2024, 18:29:33

The holders for the T 52 with the end number 0440 are rare and unfortunately difficult to find. They were only installed in the late 280's.
Peter

Title: Re: aluminum mounting bracket for power brake booster
Post by: jonp821 on June 19, 2024, 17:49:32

Hi Peter----   So I am finding out.  I may have located one in Germany, if I have too, I'll bite the bullet and send for it  ---jon p

Title: Re: aluminum mounting bracket for power brake booster
Post by: Peter h on June 19, 2024, 19:33:44

I know someone who uses a small wedge to raise the angle of the early holder so that the T52 can be installed.
But T52s are also difficult to get.
It is slowly becoming very difficult to get important spare parts.
Peter

Title: Re: aluminum mounting bracket for power brake booster
Post by: mdsalemi on August 25, 2024, 17:25:29

Anyone have a photo of the part?

Title: Re: aluminum mounting bracket for power brake booster
Post by: Peter h on August 25, 2024, 18:15:53

T51 140
T52 044 bigger
A T52 with holder 140 sits too low on the frame
Peter