Pagoda SL Group
W113 Pagoda SL Group => Electrical and Instruments => Topic started by: CJHenderson on February 13, 2024, 14:16:13
-
Where does the yellow wire attach to? I know where the red, black, & blue goes to.
-
I think I saw on some of the applications that it may be for curve change (signal - curve X, no signal - curve Y) or for D-jetronic connection on some other, like in the link.
https://123ignitionusa.com/wiring-diagrams/
-
I will check later but don't recall having a yellow wire. What 123 did you buy?
-
Got it from SLS. It's a 123/Tune 6-R-V-M Produced in the Netherlands.
-
you have a different one and from what I see, the yellow wire is to select different curves.
Thake a look at their manual:
https://123ignitionusa.com/content/123_tune_manual.pdf
-
The yellow wire is on the TUNE PC programmable distributor along with a Red, a Black, and a Blue. The yellow is connected to a power source and will activate curve two when switched on, in the pc programmable distributor.
Hope this helps
-
Hello 123ignitionusa,
So, are you a 123 distributor distributor? Ha! Sorry, couldn't help myself. If you're a vendor, you can register as such and post in the vendor forum.
-
Not a vendor.