Pagoda SL Group

W113 Pagoda SL Group => Electrical and Instruments => Topic started by: CJHenderson on February 09, 2024, 18:44:59

Title: Alternator Fanbelt does not fit.
Post by: CJHenderson on February 09, 2024, 18:44:59

I have a 10x850 fanbelt that does not fit my alternator/water pump/crank pully. I do not have AC in the car. What size should use?

Title: Re: Alternator Fanbelt does not fit.
Post by: alchemist on February 09, 2024, 19:06:23

850 means 50 inches long. The AC should have a separate belt. I recently replaced my fan belt and it took 54 inches. The best way to measure the length use a thread run it around the water pump pulley and the Alt pulley. The best and cheapest place to buy belts measured by inches is Home Depot on line. Good Luck.

Title: Re: Alternator Fanbelt does not fit.
Post by: CJHenderson on February 09, 2024, 20:10:19

I have neither AC or the bracket that the compressor and alternator would be attached to, I have the OEM bracket that have the alternator sitting lower.

Title: Re: Alternator Fanbelt does not fit.
Post by: Pawel66 on February 09, 2024, 21:03:07

This is what parts list is saying and what I bought:

A 004 997 95 92 V-BELT replaced with A 006 997 09 92

A 006 997 09 92 V-BELT 12,5 X 750 MM

Price is about $15 here.

Title: Re: Alternator Fanbelt does not fit.
Post by: WRe on February 10, 2024, 07:16:57

Alternator
early
9,5mm x 875mm (A 005 997 8392)
9,5mm x 910mm (A 006 997 0292)
late
9,5mm x 935mm (A 006 997 3292)

Power sreering
12,5mm x 750mm (A 006 997 0992)

AC
13mm x 1075mm (A 001 997 4392)

Length +/- mm