Pagoda SL Group

W113 Pagoda SL Group => Electrical and Instruments => Topic started by: babi on January 15, 2024, 09:52:12

Title: HEATER CONTROL UNIT (dimensions)
Post by: babi on January 15, 2024, 09:52:12

I need help.
I am building a heater control unit for one of my clients. Could someone tell me the "A" and "B" dimensions? This part is currently missing (not my picture). The control unit is complete. I just want to make sure everything is fine.
Thanks!

Title: Re: HEATER CONTROL UNIT (dimensions)
Post by: BobH on January 16, 2024, 16:18:52

Sorry no one seems to have answered.  Is it just the slot size and position you need, do you not have the right hand piece you can measure?

Title: Re: HEATER CONTROL UNIT (dimensions)
Post by: babi on January 18, 2024, 07:46:09

Thanks for your reply!
It seems that my problem will be solved in the next few days.

Title: Re: HEATER CONTROL UNIT (dimensions)
Post by: yves on January 18, 2024, 08:01:35

A = 15 mm +-
B= 5 mm +-
It's difficult to measure in the car,

Title: Re: HEATER CONTROL UNIT (dimensions)
Post by: babi on January 18, 2024, 08:07:47

I really appreciate your help.
Thank you!

Title: Re: HEATER CONTROL UNIT (dimensions)
Post by: BobH on January 18, 2024, 08:08:12

If you're intending to make these chrome parts, the set for RHD cars is no longer available, even used ones are scarce and usually in poor condition

There would definitely be a demand for RHD drive sets

Title: Re: HEATER CONTROL UNIT (dimensions)
Post by: AdelaidePagoda on January 18, 2024, 10:50:18

I am also looking for these parts for a RHD car. So if someone has them, and would like to sell, please hit me up 🙏🏻

Title: Re: HEATER CONTROL UNIT (dimensions)
Post by: babi on January 19, 2024, 14:36:20

I assume it is the same as the one in the LHD cars. They are just mirrored. I might be able to make one. But am is not sure.

Title: Re: HEATER CONTROL UNIT (dimensions)
Post by: BobH on January 19, 2024, 15:50:30

Yes, basically a mirror image

Title: Re: HEATER CONTROL UNIT (dimensions)
Post by: WRe on January 21, 2024, 15:03:23

Hi,
as Yves mentioned a little bit difficult to measure I would say
A = 14.8 mm
B =  4.8 mm
;-) WRe