Pagoda SL Group

W113 Pagoda SL Group => Body, interior, paint, chrome, and cosmetic items => Topic started by: Kenscar on June 11, 2023, 17:17:37

Title: 230 Trunk lid will not open
Post by: Kenscar on June 11, 2023, 17:17:37

I have a '66 230, the trunk will not open.  Is there a way to open the lid? The barrel pushes in but it will not release.  It has been working along.

Title: Re: 230 Trunk lid will not open
Post by: mnahon on June 11, 2023, 20:06:51

This is probably a stupid question, but are you sure it's not locked?

Title: Re: 230 Trunk lid will not open
Post by: Benz Dr. on June 11, 2023, 22:00:38

If it is locked and you are unable get into your trunk it could be that the push pin has fallen off of your lock. I have a way to get into locked trunks so PM if you need help.

Title: Re: 230 Trunk lid will not open
Post by: Kenscar on June 12, 2023, 22:26:18

Quote from: mnahon on June 11, 2023, 20:06:51

This is probably a stupid question, but are you sure it's not locked?

The trunk is not locked.

Title: Re: 230 Trunk lid will not open
Post by: mnahon on June 13, 2023, 20:59:39

You should PM Dan (BenzDr); he may have a way for you to open it.

Title: Re: 230 Trunk lid will not open
Post by: Mike Hughes on June 14, 2023, 13:41:16

Just a couple of thoughts: 

There is license plate illumination on the underside of the license plate "cove" adjacent to the trunk latch button.  After removing the clear plastic lens and the bulb (and disconnecting the battery!), is there any access to trip the mechanism from that point?

Inside the soft top compartment there is a 2–3-inch round hole at the center of the rear wall that may give a little access to the trunk area.  It there a way to trip the mechanism from there with a length of rod?