Pagoda SL Group

W113 Pagoda SL Group => General Discussion => Topic started by: 114015 on June 21, 2005, 17:47:18

Title: Lampentopf-Einbaulehre
Post by: 114015 on June 21, 2005, 17:47:18

Have you ever seen this?
I've never seen that before.
Could not bid on it - was too expensive for me for a just "nice-to-have" item... :(

Load-up does not work again, so here is the link.

http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&category=76017&item=4554519421

Best,



Achim
(Magdeburg, Germany)

Title: Re: Lampentopf-Einbaulehre
Post by: glennard on June 21, 2005, 18:53:20

quote:

---

Originally posted by 114015

Have you ever seen this?
I've never seen that before.
Could not bid on it - was too expensive for me for a just "nice-to-have" item... :(

Load-up does not work again, so here is the link.

http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&category=76017&item=4554519421

Best,



Achim
(Magdeburg, Germany)

---

?? I give up.  What is it? (Was ist los?)

Title: Re: Lampentopf-Einbaulehre
Post by: ChrisInNashville on June 21, 2005, 18:58:19

rough translation:

Installation Guide For Headlights

What is it used for?

Title: Re: Lampentopf-Einbaulehre
Post by: Cees Klumper on June 21, 2005, 23:23:31

As the ad says, it's "Fur das paßgenaue Einschweißen der Lampentöpfe äußerst hilfreich".

To install (weld in place) the steel headlamp buckets that sit behind your headlight assemblies. I imagine this device aligns it properly with the fenders/rest of the body. Would be a nice to have for people who do Pagoda restorations for a living I suppose.

Cees ("Case") Klumper in Amsterdam
'69 white 280 SL automatic

Title: Re: Lampentopf-Einbaulehre
Post by: Bob G ✝︎ on June 23, 2005, 16:09:38

I did see this item in the old tool cataloge I have from Mercedes-Benz I would really like to get the measurements of one and what material is used. It look like you use the four holes to screw it in place.
I did go to the e-bay page and am I correct in that  the final price was 400 euros?

Bob Geco

Title: Re: Lampentopf-Einbaulehre
Post by: 114015 on June 24, 2005, 12:44:41

Hello alltogether,

First of all, I apologize. I did not explain what this tool is good for. Yes, Cees is right, it is (was) used for the correct installation of the headlight housing.
I would guess it is made of diecast or aluminum.

No Bob, the final bid price was 115 €uros [:0](about 130 - 140 $$) but this was already - as I believed - a little to much for a just "nice to have" item. :?

Best

Achim
(Magdeburg, Germany)

Title: Re: Lampentopf-Einbaulehre
Post by: 114015 on June 24, 2005, 15:14:08

(OK, let's try to upload the pic of this lamp housing aligning tool again - just to save the picture for our database before it disappears from ebay ...)

Download Attachment: (http://images/icon_paperclip.gif) lamp_tool.jpg (http://www.sl113.org/forums/uploaded/114015/200562417111_lamp_tool.jpg)
41.5 KB

Achim
(Magdeburg, Germany)