Pagoda SL Group

W113 Pagoda SL Group => Drive train, fuel, suspension, steering & brakes => Topic started by: afibbe on December 29, 2022, 01:27:15

Title: Muffler shield
Post by: afibbe on December 29, 2022, 01:27:15

The picture shows my muffler heat shield. Is this the correct shape?

Title: Re: Muffler shield
Post by: WRe on December 29, 2022, 06:55:35

Hi,
see here:
https://www.sls-hh-shop.de/main/en/mercedes-230-280sl-w113-/49-exhaust-systems/49-a-exhaust-system-standard/heat-prot-shield-rr-silencer-p-5364
or att. picture wirh measures.
...WRe

Title: Re: Muffler shield
Post by: afibbe on January 07, 2023, 23:49:29

I checked the measurements and if it wasn’t bent it would match the measurements shown below. The puzzling thing is the vertical bend is by on a machined bead and the 3 small beads don’t run through the large bead. I think this was factory made. Could this be for a different car?

Title: Re: Muffler shield
Post by: 114015 on January 08, 2023, 00:49:03

No bend.

No, not that I am aware of, and I have seen quite some ...
The one WRe showed is correct.
This is what it looked and looks on my cars as well.

Achim

Title: Re: Muffler shield
Post by: MP on January 09, 2023, 09:09:45

I have one that came from SLS some years ago, I have not fitted it as I am now not sure if my early 250 should have one also I don't know exactly where it fits.
Mine does not have the sloped shape on one corner.