Pagoda SL Group

W113 Pagoda SL Group => Drive train, fuel, suspension, steering & brakes => Topic started by: pauloe on October 30, 2022, 00:03:23

Title: shifter linkage, attachment of stabilizing rods at shifter end, 280 SL
Post by: pauloe on October 30, 2022, 00:03:23

I have disassembled shifter linkage.  Ordered all bushings.  One question on reassembly.  Catalog B diagram shows no washers on the connections, below the plate 85 or above the plate under nut 111.  But many pictures I see here show a washer under nut 111.  (plate 85 is numbered 264 and nut 111 is numbered 310 in https://www.sl113.org/wiki/TransmissionClutch/Shifter).  The bushings 86 (268 in wiki) were missing and replaced by a length of rubber tubing when I disassembled, so I didn't see what it is supposed to look like.  any help would be appreciated so I can put this back together correctly.