Pagoda SL Group

W113 Pagoda SL Group => Drive train, fuel, suspension, steering & brakes => Topic started by: mikeswplt on June 10, 2022, 13:42:24

Title: Drive shaft bolts
Post by: mikeswplt on June 10, 2022, 13:42:24

Would appreciate any info on the bolts used to attach the drive shaft to the flange on the
rear end. I’ve been unable to locate the 4 bolts/nuts/washers that were removed when the 250SL I’m restoring was dismantled. The parts diagram doesn’t display them or reference any part number. A photo I saw online showed what looked like a nut retainer
as part of the connection.

Title: Re: Drive shaft bolts
Post by: mikeswplt on June 10, 2022, 16:15:28

Talked to MB classic and bolts are listed as cheese head screw NLA. Nut retainer is lock plate, no washers required. Need to source a used set of bolts or find a suitable substitute.

Title: Re: Drive shaft bolts
Post by: dirkbalter on June 10, 2022, 17:06:57

If you know what you need, you can it probably here:

https://belmetric.com/?gclid=EAIaIQobChMI2eSQl66j-AIVcyCtBh1gCwsoEAAYASAAEgKFUfD_BwE

Title: Re: Drive shaft bolts
Post by: ja17 on June 11, 2022, 03:39:17

I have plenty of good used bolts. They were used many of the common sedans of the era.

Title: Re: Drive shaft bolts
Post by: mikeswplt on June 12, 2022, 21:43:42

Thanks for the offer Joe. I was able to get the bolts I needed off a 220S parts car at a local independent MB repair shop.