Pagoda SL Group
W113 Pagoda SL Group => Drive train, fuel, suspension, steering & brakes => Topic started by: gtait on May 10, 2022, 23:17:04
-
I am installing a new exhaust system and have gotten to the trial fit stage. The system seams to fit well but I am concerned about the distance between the top of the exhaust pipes and the rear axle. I currently have just over a 1” gap.
I looked through a number of photo sites but did not see any where I could make out the distance.
Can anyone tell me if I have enough distance to allow the axle movement.
Gil
-
I’m not sure what the distance should be because I’ve got my rear end apart but is the car up with the wheels hanging? or wheels in the normal position?
-
I never thought to jack up the car. Da
I currently have it on my four post lift on its wheels. I will try jacking it up.
Thanks
Gil
-
It's good the car is on its wheels; 1 inch sounds ok to me - just make sure to give the system a good wiggle when all together to make sure it doesn't touch the body of the car.