Pagoda SL Group

W113 Pagoda SL Group => Electrical and Instruments => Topic started by: BartSt on December 21, 2021, 11:09:09

Title: Volt Regulator on 230sl
Post by: BartSt on December 21, 2021, 11:09:09

Dear friends,

Where is the voltage regulator mounted in a 230SL?

Bart

Title: Re: Volt Regulator on 230sl
Post by: BobH on December 21, 2021, 12:18:08

Hello Bart, i'm no expert, but as far as i know the 230 and some 250's are mounted on the wing (fender, depending where you live in the world) see below from another post, if you search the forum there are plenty of posts, and some pictures

A 250SL should have an external fender mounted voltage regulator.
You will find it on the right (near the inlet manifold plenum) inner fender near the shock tower.

Title: Re: Volt Regulator on 230sl
Post by: lpeterssen on December 22, 2021, 18:22:45

Hello Bart

Is the rectangular silver box on the left of attached picture. Has three pins on the connector and  4 leads come to it.

Regards
Leo

Title: Re: Volt Regulator on 230sl
Post by: BartSt on December 22, 2021, 19:52:16

Leo,

Thanks

(merry xMass !)

Bart

Title: Re: Volt Regulator on 230sl
Post by: lpeterssen on December 22, 2021, 21:38:33

Bart

Merry Christmas for you too

Leo