Pagoda SL Group

W113 Pagoda SL Group => Electrical and Instruments => Topic started by: Leester on November 28, 2021, 01:48:27

Title: Routing Dash Wiring
Post by: Leester on November 28, 2021, 01:48:27

Hello all. In process of routing the interior wiring harness from the ignition switch area over to the right (left hand drive). Does the wiring harness run along the bulkhead or does it run in a channel that runs under the radio? Or is there another route? I didn't remove the harness so that's the reason for the question. 1970 280SL.  Thanks in advance. Lee

Title: Re: Routing Dash Wiring
Post by: Pawel66 on November 28, 2021, 09:39:15

May want to try the search on the forum, quite a few hits, e.g.: https://www.sl113.org/forums/index.php?topic=31812.0

Title: Re: Routing Dash Wiring
Post by: lpeterssen on November 28, 2021, 11:04:39

Dear friend


The harness route is below the radio on the lowest part of the metal dashboard metal structure.  There are several flexible “C” shaped hangers that keep the harness branch in place.

Best regards
L.peterssen

Title: Re: Routing Dash Wiring
Post by: Leester on November 28, 2021, 15:56:07

Many thanks!!