Pagoda SL Group

W113 Pagoda SL Group => Drive train, fuel, suspension, steering & brakes => Topic started by: RPSchuetz on November 27, 2021, 12:57:42

Title: Torque values
Post by: RPSchuetz on November 27, 2021, 12:57:42

I’m in the process of reattaching various parts onto my engine after a rebuild by Metric Motors. I’m wondering if there is a central resource anywhere that provides the torque settings for bolting on assemblies such as the oil filter housing, water pump and housing, powered steering pump and bracket, thermostat housing, etc. I have a copy of the BBB and Haynes manual but finding such info seems to be a hit and miss proposition…

Thanks in advance for any feedback!

Title: Re: Torque values
Post by: Cees Klumper on November 27, 2021, 15:07:21

Maybe in the technical data ("tabellenbuch") book. Small format, it should be listed in the technical manual.

Title: Re: Torque values
Post by: Pawel66 on November 27, 2021, 17:40:33

There are some torques listed in the BBB and in Haynes. Certainly not all, but for engine and suspension, they are there.

Title: Re: Torque values
Post by: Jonny B on November 28, 2021, 16:05:38

Here is an example of the 1969 book available on eBay. These are not specific to 113s but cover the whole range. A valuable resource

https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2334524.m570.l1313&_nkw=mercedes+technical+data+book+1969&_sacat=0&LH_TitleDesc=0&_odkw=mercedes+technical+data+book+1966&_osacat=0

Title: Re: Torque values
Post by: RPSchuetz on November 28, 2021, 17:12:02

Thanks!

Maybe a project for a future day - add a chapter to the Technical Manual with all the various torque values…

Title: Re: Torque values
Post by: MikeSimon on December 26, 2021, 12:34:19

Many vehicle manufacturers publish torque values for specific connections but also generic according to fastener size. I will look through my stuff to see if I have something we could use for items that are not individually specified. There may be a DIN standard.

Title: Re: Torque values
Post by: dirkbalter on December 26, 2021, 18:54:56

Take a look here.