Pagoda SL Group

W113 Pagoda SL Group => Drive train, fuel, suspension, steering & brakes => Topic started by: gordon on September 16, 2021, 12:36:11

Title: Inlet manifold heat shield 230 SL
Post by: gordon on September 16, 2021, 12:36:11

From the attached picture do I need to bend the end portions down and the rear parts upwards.  I guess it needs to be fed in after both manifolds are bolted up then the throttle link poked up from below.

Title: Re: Inlet manifold heat shield 230 SL
Post by: ja17 on September 19, 2021, 05:33:54

At the exhaust manifolds, the aluminum turns upward. At the intake manifolds the aluminum turns down.