Pagoda SL Group

W113 Pagoda SL Group => Drive train, fuel, suspension, steering & brakes => Topic started by: swood1 on October 22, 2020, 14:02:26

Title: Throw out/clutch bearing seal advice
Post by: swood1 on October 22, 2020, 14:02:26

Hi all

Can anyone advise easiest way of pushing the throw out bearing seal back in please?  I'm worried about damaging the seal itself.  Photo shoes old original seal in situ prior to me removing.

Regards

Steven

Title: Re: Throw out/clutch bearing seal advice
Post by: ja17 on October 22, 2020, 14:27:00

Find a thin wall metal sleeve and press or drive it in. I found a hole saw just the right size, ground the teeth off smooth and used it to drive the seal in place.

Title: Re: Throw out/clutch bearing seal advice
Post by: swood1 on October 22, 2020, 14:29:01

Thanks for your feedback

I shall make a tool to push it in.

Regards

Steven

Title: Re: Throw out/clutch bearing seal advice
Post by: ja17 on October 22, 2020, 14:30:57

Let us know how it goes!

Title: Re: Throw out/clutch bearing seal advice
Post by: swood1 on October 22, 2020, 15:31:42

Sorted it, thanks.

Fyi.  Pipe/tool dims:-

OD. 34.90mm
ID. 31.40
Depth. 6.0