Pagoda SL Group
W113 Pagoda SL Group => Drive train, fuel, suspension, steering & brakes => Topic started by: Bob G MN on August 26, 2020, 18:04:36
-
I.'ve read a lot about this but still a little confused. I bought a Mann P707 fuel filter. The vendor said it included an o ring but no o ring in the box. There were felt rings on top and bottom. Question is do I really need a new o ring or will the old one work (or is there really an o ring that needs to be used with this filter) Seems nuts if one is needed why Mann would no include one .
Bob
-
Hi,
there are 2 different Mann fuel filter:
- P707 w/o o-ring and
- P707x with o-ring (75 x 81,5mm) can bought separately.
I would use a new one.
...WRe
-
hello Bob,
I agree with WRe and recommend replacing the O-Ring with the fuel filter. They're cheap ($.61) - you'd think Mann would include one with each filter but unfortunately, they don't. I bought (3) from AutohausAZ just to have a couple extras on hand:
DPH Fuel Filter Seal; Fuel Filter Seal Ring for Cartridge Style Filter
P/N: 1009970040
3x $0.61
take care,, Charles
-
Fuel filters do not usually come with a seal. You will have to order it as a special part. It is a square rubber O-ring. I use some grease to glue it in the upper housing or it will fall off during installation.
-
Thanks Joe and others. I'm still a little confused. The canister for the filter is round so I thought the o ring would be round. Where does a square ring go
-
Square cross section.
-
Perhaps overkill, but attached are photos of the seal. I'll ask my wife to drop one in the mail for you,, just let me know.
-
Thanks Charles
-
MB is strange like that. When you need a complete kit, they only sell as separate items. When you need separate items, it only comes as a kit. ::)
-
And while it might seem obvious, make sure the old o-ring is out. When I did my first oil change many moons ago I found 2 o-rings in the slot. They are hard to see and it is easy to think there is no o-ring up there and put the new one over the old one.
-
Marcus,
Excellent point. Having the second O-ring in there can also lead to cracking of the housing - tightening too much.