Pagoda SL Group

W113 Pagoda SL Group => General Discussion => Topic started by: Shvegel on August 19, 2020, 19:10:04

Title: Anyone recognize these?
Post by: Shvegel on August 19, 2020, 19:10:04

These were in a bag of cowl hardware but I can’t figure out where they are supposed to go.  Any ideas?

Title: Re: Anyone recognize these?
Post by: Peter on August 19, 2020, 19:22:46

Picture(s) are missing.
^Peter

Title: Re: Anyone recognize these?
Post by: RobSirg on August 20, 2020, 06:09:29

I've restored a car recently and do not recall seeing any of those.

Rob

Title: Re: Anyone recognize these?
Post by: Peter on August 20, 2020, 11:28:20

Are they M4, M5 or M6?

^Peter

Title: Re: Anyone recognize these?
Post by: waltklatt on August 20, 2020, 14:41:25

4 screws look like the ones that hold the hood release catch to firewall.
2 nuts and washer look like the cowl vent hinge flap fasteners.
Walter

Title: Re: Anyone recognize these?
Post by: Shvegel on August 21, 2020, 02:11:48

You might be right Walt.  I just sent a bunch of new M6 flat heads out to the platers when i sent stuff off just in case.

Title: Re: Anyone recognize these?
Post by: ja17 on August 21, 2020, 03:27:32

Yes, I second Walter's guess on the flat head screws for the firewall hood latch.

Title: Re: Anyone recognize these?
Post by: 66andBlue on August 21, 2020, 06:16:51

If not the hood latch on the firewall then perhaps the door locks?

Title: Re: Anyone recognize these?
Post by: Garry on August 21, 2020, 10:24:45

And here is another suggestion.  Maybe the B pillar chrome lock plate cap screws


https://www.sl113.org/forums/index.php?topic=7977.msg51209#msg51209