Pagoda SL Group

W113 Pagoda SL Group => Electrical and Instruments => Topic started by: RobSirg on August 17, 2020, 15:04:09

Title: Correct finish to a 280SL Wiper Motor
Post by: RobSirg on August 17, 2020, 15:04:09

Hi,

I wonder if someone can enlighten me to the correct finish to the wiper motor ( 280SL).
I thought it was Black body ( Matt or Satin?)with Silver Gal top and base. ( one on the right)
Today l received a replacement motor which the owner claims was the original finish. ( all Gal on the left).
Hope someone can confirm one way or the other. ( see both photos attached)

Cheers

Rob

Title: Re: Correct finish to a 280SL Wiper Motor
Post by: mrfatboy on August 17, 2020, 15:22:18

I think original was all silver. Replacements had black body.

Title: Re: Correct finish to a 280SL Wiper Motor
Post by: RobSirg on August 17, 2020, 15:30:24

Thanks M,

I found this response to a question re: 230SL wiper motor :


W113SL
Inactive
USA, FL, Naples
View Profile  Personal Message (Offline)
« Reply #1 on: October 04, 2011, 20:52:46 »
Wiper motors are natural steel, unpainted .  I suspect they were cad or zinc plated when new but not yellow dichromated. You can strip off the old paint and clear coat it to be correct.

Pete Lesler
National Concours Committee Chair
MBCA

Title: Re: Correct finish to a 280SL Wiper Motor
Post by: Paul & Dolly on August 17, 2020, 16:57:16

Rob,

Is there any difference in the wiper motors for a LHD or RHD car ?

Thanks

Paul

Title: Re: Correct finish to a 280SL Wiper Motor
Post by: 49er on August 17, 2020, 21:48:13

 Here is a photo of mine. Original to the car and not painted other than the base.

John

Title: Re: Correct finish to a 280SL Wiper Motor
Post by: RobSirg on August 17, 2020, 21:54:42

Thanks John,

I think that confirms the original finish was natural Gal.
Certainly no physical difference to a RHD drive wiper motor.

Paul, l assume you are asking would they (MB) paint a RHD one black? I think this would be unlikely in my mind.
I sent mine away to get restored and it came back with a black body - I’m going to check some old photos and other reference material but I’m fairly comfortable that it should not be black.

Rob