Pagoda SL Group

W113 Pagoda SL Group => Electrical and Instruments => Topic started by: Blackted on November 10, 2019, 07:39:07

Title: Auto v Manual transmission main wiring looms.
Post by: Blackted on November 10, 2019, 07:39:07

Have a pagoda that has been converted from stick shift Manual to automatic.
There is no wiring loom to be found for the auto shift solenoids.
Question, are the two looms different ?

Title: Re: Auto v Manual transmission main wiring looms.
Post by: cfm65@me.com on November 10, 2019, 13:28:20

Hi Blackted,
Yes, there are various looms for the Pagodas, LHD vs LHD, manual vs auto, 230 vs 250 vs 280 also USA vs EU, etc. The auto setup does not have a separate, dedicated loom as for example the E Type. They have about 7 looms for each car, eg dash board to left forward, dashboard only, dash to right rear,  nose section only. In other words different sections.
Regards
Chris
ftp://
The Pagodas have only one continuous loom specific to the car, no add on’s.

Title: Re: Auto v Manual transmission main wiring looms.
Post by: jeffc280sl on November 10, 2019, 22:04:25

There are differences in wiring by year as well.  Here is a wiring diagram for auto and manual late model SLs with emission systems.  I realize this system is stand alone and not part of the shifting solenoids.

Title: Re: Auto v Manual transmission main wiring looms.
Post by: Blackted on November 13, 2019, 22:30:11

Thanks for information, looks like new loom required to suit auto.

Title: Re: Auto v Manual transmission main wiring looms.
Post by: Benz Dr. on November 13, 2019, 23:41:37

It's fairly easy to go from Auto to standard trans as far as wiring goes but not the other way around. Why don't you go back to the standard trans?