Pagoda SL Group

W113 Pagoda SL Group => Body, interior, paint, chrome, and cosmetic items => Topic started by: jan lauwers on November 03, 2019, 17:26:37

Title: disassembly of doorhandles
Post by: jan lauwers on November 03, 2019, 17:26:37

Gentlemen,

I have now entered the stage of the body restoration and I am preparing my 280SL for a repaint job. With that comes re-chroming and a new interior and soft top.

I 'd like to remove the cylinders of the door handles so that I can have the (empty) handles re-chromed. I first tried on the trunk lock... I managed that, so now I am encouraged to do the same on the door handles.

I have read through all (I think) the posts on this forum about the disassembly of the door handles, but I have not found the answer to my question:
How do I remove the cylinder (the part that you push with your thumb to open the door), from the doorhandle casting? I have removed the circlips and the spring. What is the next step now? (see pic please, this is how far I have gotten).

Title: Re: disassembly of doorhandles
Post by: badali on November 03, 2019, 17:47:45

You may have to insert the key.  I have done this with other locks.  It levels the pins and it should slide out.

Title: Re: disassembly of doorhandles
Post by: jan lauwers on November 03, 2019, 18:36:41

Thanks, Badali,


I have not made myself clear. I have inserted the key and then, indeed the cylinder comes out. However, I want the housing that holds the cylinder to come out.

Jan

Title: Re: disassembly of doorhandles
Post by: Peter on November 03, 2019, 19:31:49

Hi Jan,

There is a ring (see blue arrow) which you can take out with a screwdriver.
Then the you can take out counter ring, spring and the cylinder.

Succes, Peter

Title: Re: disassembly of doorhandles
Post by: Peter on November 03, 2019, 19:34:41

other picture

Title: Re: disassembly of doorhandles
Post by: jan lauwers on November 03, 2019, 19:50:21

Ok Peter, this woked, thanks a lot for your help. Great forum!

Jan