Pagoda SL Group

W113 Pagoda SL Group => Drive train, fuel, suspension, steering & brakes => Topic started by: swood1 on October 16, 2019, 13:17:25

Title: Differential input shaft seal replacement
Post by: swood1 on October 16, 2019, 13:17:25

Hi all,

Just looking at replacing the input shaft seal on my differential.  Would it be best to make a special tool to allow me to push the old one out?  Seating on the flat surface?  I have already scrapped one seal.  I tried using the new seal to push the old seal out (no joy on that one).    Looking at it I think an appropriate piece of tube or large diameter round bar bored out would do the trick.

Another seal on order :(


Steve

Title: Re: Differential input shaft seal replacement
Post by: ja17 on October 16, 2019, 14:34:35

Do you have the end cap of the differential? If so you can use a socket (from your tool set) to press or drive the old seal out. You can press the new one in with your bench vice and flat plate.

Title: Re: Differential input shaft seal replacement
Post by: swood1 on October 16, 2019, 16:46:37

Good idea for removing the old one, just need to wait for new to arrive.

Cheers.

Steve