Pagoda SL Group
W113 Pagoda SL Group => Drive train, fuel, suspension, steering & brakes => Topic started by: FresnoBob on August 21, 2019, 17:54:17
-
I completed adjusting my automatic transmission and am happy to loan my oil filled gauge, hose and M8 banjo fitting combination if you pay the shipping charges.
-
I'll take you up on it!
I'll PM you on my addy.
Thanks mate!
-rob
-
I shipped it by post today. The tracking number is 9114 9023 0722 4015 9579 88.
Good luck!
Bob
-
Thanks a ton! You'll have to give me your paypal addy to reimburse you.
BTW, did you have to remove any exhaust shielding to get to the test port here?
-
No shielding removal was necessary. I installed the gauge when the engine was cold, but removed it with the engine hot. Be careful to remove the correct screw, which is the one easiest to remove. I first installed the gauge in a screw above that and received nonsensical readings. I posted some photos earlier.