Pagoda SL Group

W113 Pagoda SL Group => Wanted To Buy => Topic started by: cfm65@me.com on July 24, 2019, 18:11:52

Title: Flywheel bolts wanted
Post by: cfm65@me.com on July 24, 2019, 18:11:52
Hi Gents,
I am looking for 6  12 X 20 mm flywheel to crank bolts.
Regards
Chris(http://)
Title: Re: Flywheel bolts wanted
Post by: hkollan on July 25, 2019, 06:12:03
Hi,

I believe These bolts are still available from at the MB-dealer. German price is a little more than 20€ per bolt.
I believe these are stretch bolts and preferably should not be reused, in case you were looking for used ones.

Hans K
Title: Re: Flywheel bolts wanted
Post by: stickandrudderman on July 25, 2019, 10:08:31
Stretch bolts have a measurable stretch limit. If they are within the limit they can be re-used.
Title: Re: Flywheel bolts wanted
Post by: cfm65@me.com on July 25, 2019, 11:35:36
Thanks Hans and Colin.
They seem to be available @ about 25€ here in South Africa. I’ll bite the bullet and order some locally.
Regards
Chris
Title: Re: Flywheel bolts wanted
Post by: Cees Klumper on July 25, 2019, 20:25:15
Hey Chris, I believe I have these lying around (used), would be happy to send you a set gratis if I can find them tomorrow? If someone has the acceptable length I can check that.
Title: Re: Flywheel bolts wanted
Post by: Cees Klumper on July 26, 2019, 15:04:52
Just located 6 but they are 40 not 20 mm in length. I may have also shorter ones but not sure.
Title: Re: Flywheel bolts wanted
Post by: Benz Dr. on July 26, 2019, 15:32:07
20mm would be for a standard flywheel. 40 for auto?
Title: Re: Flywheel bolts wanted
Post by: fosdicke on July 26, 2019, 22:08:16
20mm would be for a standard flywheel. 40 for auto?

Visa /Versa
Title: Re: Flywheel bolts wanted
Post by: cfm65@me.com on September 16, 2019, 11:31:45
Thanks Gents,
I found some locally. Much appreciated.
Regards
Chris
Cape Town