Pagoda SL Group

W113 Pagoda SL Group => Body, interior, paint, chrome, and cosmetic items => Topic started by: merrill on October 27, 2018, 13:33:20

Title: glove box door curved rod broke off
Post by: merrill on October 27, 2018, 13:33:20

well darn,

i was almost done finishing the interior on my car all i had to do was install the glove box.

i was about to set the glove box in place, noticed the glove box door was not opening smoothly when the arm broke off.

i did search the forum and found this post so i appears the rod can be brazed back into place.  (https://www.sl113.org/forums/index.php?topic=21496.msg152963#msg152963)

it loks as if i need to figure out how to separate the 2 halves of the door to get to where the rod is brazed?


any tips would be appreciated
matt

Title: Re: glove box door curved rod broke off
Post by: Pawel66 on October 27, 2018, 13:44:20

You will most likely need to re-paint anyway - is it not better to buy a second hand door?

Here is one on ebay:
https://www.ebay.com/itm/MERCEDES-280-250-230-SL-113-GLOVE-BOX-DOOR-LID-230SL-250SL-280SL-CHROME/173596833860?hash=item286b2d7844:g:JE4AAOSwB9xXOjL-:rk:45:pf:0&vxp=mtr

But I am sure the usual ebay sellers may have some of them too. May ask Niemoeller or the store sin the US.

Title: Re: glove box door curved rod broke off
Post by: dirkbalter on October 29, 2018, 16:18:36

Mine broke at disassembly. I welded it back on and ground the weld smooth. Why are you thinking of taking the halves apart?

Title: Re: glove box door curved rod broke off
Post by: merrill on October 29, 2018, 19:25:10

Dirk
hi,
i thought it was necessary to split the door to re weld.

I took it to a local shop and they are just going to weld it back on for me.  I need to order paint to finish the job.

from my research it appears the rods break off sometimes..   Sucks because I had the box in and took it out. thats when it broke.

I did ask Gernold at SL tech what he does and he said he finds and buys a used door and repaints as needed.

Title: Re: glove box door curved rod broke off
Post by: dirkbalter on October 29, 2018, 21:01:15

Matt
Yes that’s unfortunate. If they are careful with the welding you may only have to paint the inside. . In my case it wasn’t a big deal because everything still gets painted. (Also, and you probable did that, make sure that it is welded in in the correct location.)

Title: Re: glove box door curved rod broke off
Post by: Pawel66 on October 29, 2018, 21:19:28

I know it may be obvious, but I will write it:

if I were going to the welders, I would take the complete box with me with the fixed hinge and when they do the "touch" weld, I would fit the door and check if rod goes through the hole with no squeak.

Rosette will fit... it has to go smooth with rosette installed.

Title: Re: glove box door curved rod broke off
Post by: merrill on October 31, 2018, 15:56:02

Pawel , Dirk
thank you for the tips.

I will make sure to take the box with me when i pick up the door.

i really felt bad when the rod broke off.   but after all of the feedback  i guess it happens.

i will post the results when i receive the door.