Pagoda SL Group

W113 Pagoda SL Group => Drive train, fuel, suspension, steering & brakes => Topic started by: PeterPortugal on October 19, 2018, 08:20:46

Title: Fuel Pump Motor Rewind - UK or Mainland Europe
Post by: PeterPortugal on October 19, 2018, 08:20:46
Hi All,

Does anybody know of any specialists who will rewind a Bosch long style fuel pump motor. Portugal or UK would be my preferred locations, but I could also consider other European states.

Best Regards

Peter
Title: Re: Fuel Pump Motor Rewind - UK or Mainland Europe
Post by: Taleb on October 19, 2018, 09:43:53
I did mine with Niemoller.de in Germany complete restoration like new , it cost me 570€ includ the shipping to Kuwait...

Good luck
Title: Re: Fuel Pump Motor Rewind - UK or Mainland Europe
Post by: PeterPortugal on October 19, 2018, 10:44:24
Thanks Taleb but I just need the motor doing, the rest of the pump has been done.

Peter
Title: Re: Fuel Pump Motor Rewind - UK or Mainland Europe
Post by: PeterPortugal on October 29, 2018, 08:26:05
Just giving this post another push !
Title: Re: Fuel Pump Motor Rewind - UK or Mainland Europe
Post by: George Des on October 29, 2018, 16:22:29
Eurton Electric in California if all else fails. Was about $135 US last time I used them
Title: Re: Fuel Pump Motor Rewind - UK or Mainland Europe
Post by: Pawel66 on October 29, 2018, 16:49:11
If you talk US, maybe it is Bob?
Title: Re: Fuel Pump Motor Rewind - UK or Mainland Europe
Post by: BaronYoungman on October 29, 2018, 16:50:55
I can rewind for $150 but think shipping would get expensive.
Bob
Title: Re: Fuel Pump Motor Rewind - UK or Mainland Europe
Post by: PeterPortugal on October 30, 2018, 09:16:21
Bob,

I would happily pay 150 bucks. Let me think about this as I work in Algeria.....with some Americans plus a few Brits who are now resident in the USA, typically Florida.

I might be able to get one to courier it as a favour.

There must be places in Europe which do this work too though.

Regards

Peter
Title: Re: Fuel Pump Motor Rewind - UK or Mainland Europe
Post by: BaronYoungman on October 30, 2018, 14:55:18
Peter if you look up a local small electric motor (generator) repair shop they should either do the work in-house or know someone who can rewind the armature.  It is a very labor intensive job, but with the proper machines it should take less than 45 minutes to wind then glue and bake overnight.  It is a fascinating process see attached picture..
Bob
otherwise I can help I am just trying to save you money
Title: Re: Fuel Pump Motor Rewind - UK or Mainland Europe
Post by: stickandrudderman on October 30, 2018, 17:52:15
I've used a place in London. I will try to find their details later.

Title: Re: Fuel Pump Motor Rewind - UK or Mainland Europe
Post by: PeterPortugal on November 01, 2018, 09:30:36
Hi Colin,

I found a place called Robson & Francis in South London who were confident they could do it.

They might also be useful for you, as an alternative to the place you have used before.

I will give some feedback when they have completed the overhaul.

Peter
Title: Re: Fuel Pump Motor Rewind - UK or Mainland Europe
Post by: PeterPortugal on November 01, 2018, 09:40:28
Bob,

That picture is great because the guy clearly has specialized motor rewinders finger nails !!

I've just had a look at the wheeler dealers AMG tribute. Very nice. I remember looking at an original about 15 years ago with the AMG 32V engine as well....seller was probably asking about 10k USD at the time !!

Thanks

Peter