Pagoda SL Group

W113 Pagoda SL Group => Body, interior, paint, chrome, and cosmetic items => Topic started by: johnk on October 03, 2018, 03:36:23

Title: Removal of hood tension spring
Post by: johnk on October 03, 2018, 03:36:23

What I founf from searching the forum and the tech manual is that the spring can be removed after taking the hood off the car and removing the plastic plates that hold the spring it in place. Mine doesn't seem to want to go anywhere after doing the above. The end that takes a 90 degree angle to goes into the channel doesn't seem to want to get pulled out. Any advicce as how to proceed from here is greatky appreciated. Do I just pull harder and hope nothing bad happens?

Thanks
John

Title: Re: Removal of hood tension spring
Post by: cfm65@me.com on October 03, 2018, 05:51:35

Hi John,
Yep, just give it a tug and the end should slip out of the elongated slot. Ensure that there is no tention on the spring and it will come out.
Regards
Chris

Title: Re: Removal of hood tension spring
Post by: WRe on October 03, 2018, 07:41:47

Hi,
See here: https://www.sl113.org/forums/index.php?topic=26409.msg189004#msg189004.
...WRe

Title: Re: Removal of hood tension spring
Post by: johnk on October 03, 2018, 11:42:44

thanks gents. I will just pull harder.