Pagoda SL Group

W113 Pagoda SL Group => Electrical and Instruments => Topic started by: free2keun on July 21, 2018, 06:12:29

Title: foot dimmer on first made Pagoda's
Post by: free2keun on July 21, 2018, 06:12:29

Hello, was there a foot dimmer placed on the first made Pagoda's ?  I can't find the high beam headlight switch.

the problem is that the high light only works when I trow the column switch..

and the other problem is that the low lights doesn't work.. :-(

so i have to ride with the fog lights on 

or weren't the first Pagoda's equipped with the high beam headlight switch.. ?

Title: Re: foot dimmer on first made Pagoda's
Post by: CCollum on July 22, 2018, 14:01:46

My 64’s high beam switch is on the floor, activated by my left foot. I have a LHD.

Title: Re: foot dimmer on first made Pagoda's
Post by: Pawel66 on July 22, 2018, 14:09:15

When you look into EPC, you have early PN A0005451112 then a later one A0005451212. There is no information "As of chassis...." - nothing like that. That would suggest it was there, but this is a theory.

Title: Re: foot dimmer on first made Pagoda's
Post by: free2keun on July 23, 2018, 07:35:29

Thank You Pawel66 and CCollum.  It is right.  From the beginning, there was a foot dimmer. 

Yesterday, I looked for about 4 hours for electrical wiring of the foot dimmer..  and found nothing.  No white or yellow wire that was lost, loss or cut off.  Also the withe/yellow that that starts from the light switch..  I don't see it elsewhere..

On the fuses, I see a big white arriving and a small going away, also a big yellow and small yellow (they go to the front lights)

Title: Re: foot dimmer on first made Pagoda's
Post by: Pawel66 on July 23, 2018, 08:03:52

Well, perhaps one of the POs just slaughtered the wires and connected power feed from light switch to high beam power supply, omitting the dimmer switch. Then it is just a matter of finding the appropriate wires with multimeter or routing them again.

It sounds like you have the wiring diagram.