Pagoda SL Group

W113 Pagoda SL Group => General Discussion => Topic started by: erickmarciano on January 16, 2005, 21:30:45

Title: want make shure did not set valve to small
Post by: erickmarciano on January 16, 2005, 21:30:45

Adjusted my valves today and not sure it I did it too tight.
Intake 0.003 ex. 0.007, it can pull the gauge and it is very tight but still goes through, does that mean I am ok on this?

thanks

1971 280sl
1962 VW
1954 Allstate vespa
1958 gs150 vespa
1962 gs160 vespa

Title: Re: want make shure did not set valve to small
Post by: ja17 on January 16, 2005, 22:15:10

Hello Erick,
You should be ok. I like to adjust until the feeler guage is locked tight and then loosen until it slides out with a snug feel.

Joe Alexander
Blacklick, Ohio