Pagoda SL Group

W113 Pagoda SL Group => Electrical and Instruments => Topic started by: specracer on April 29, 2018, 22:48:30

Title: Fuel Gauge Testing?
Post by: specracer on April 29, 2018, 22:48:30

Was curious if there was anything that could be done to test a fuel gauge? I have a new sending unit installed already. I read in the manual I think that the impedance should be 83 to 4 ohm (I think that is what I read), so when I get the gauge out (I have the cluster out of the dash, just have not opened it yet). Just trying to see if the gauge is bad, before spending $150-250 (used to new range that I have seen, from the usual suppliers).

Title: Re: Fuel Gauge Testing?
Post by: WRe on April 30, 2018, 06:35:09

Hi,
here you find a lot of information about our fuel senders: http://www.hehlhans.de/tipp19.htm.
...WRe

Title: Re: Fuel Gauge Testing?
Post by: specracer on May 01, 2018, 00:35:22

Wow thanks for this link. Ill have to explore it with some sort of translator.