Pagoda SL Group

W113 Pagoda SL Group => Drive train, fuel, suspension, steering & brakes => Topic started by: 450sl on November 24, 2017, 11:18:03

Title: Source for Sanden 508
Post by: 450sl on November 24, 2017, 11:18:03

Can someone name a source for buying a Sanden AC-Compressor with rear inlet and outlet pipes please?

thanks
Mark

Title: Re: Source for Sanden 508
Post by: Shvegel on November 25, 2017, 04:13:38

You would need adapters if you are using the stock lines.

https://www.ebay.com/itm/NEW-SANDEN-STYLE-SD5H14-AC-COMPRESSOR-AND-CLUTCH-4536-6630-6676-6680/272944439169?hash=item3f8cc19f81:g:lIIAAOSwYZ9ZmHm-&vxp=mtr

Title: Re: Source for Sanden 508
Post by: Shvegel on November 25, 2017, 04:20:13

Adaptors are o-ring to flare.

https://nostalgicac.com/fittings-hose-kits/flare-adapters.html

Title: Re: Source for Sanden 508
Post by: 450sl on November 25, 2017, 14:52:39

Thankyou very much Shvegel !


What  setup should i use for the Condensor ;  used/ new ,  twin or single ??

thanks
Mark

Title: Re: Source for Sanden 508
Post by: Shvegel on November 25, 2017, 17:27:30

Didn't catch you were in Europe.  I have a new single pass that I bought for very little money.  I am away from home for the next week but when I get home I will post the part number.  I am sure they are available everywhere.  Anything new will be much more efficient due to advancement in designs. 

Title: Re: Source for Sanden 508
Post by: 450sl on November 26, 2017, 12:03:28

Would be great .    i have ordered the pump you suggested thanks again.    Mark

Title: Re: Source for Sanden 508
Post by: Shvegel on December 05, 2017, 10:38:27

Here are some pictures of the condenser.  It is a universal parallel flow available for around 80USD in the US.

Title: Re: Source for Sanden 508
Post by: 450sl on December 05, 2017, 11:19:32

Thankyouverymuchindeed !!

looking at the partnumber i presume outer dimensions are 14"x23"  ?


thanks
Mark

Title: Re: Source for Sanden 508
Post by: Shvegel on December 06, 2017, 01:27:25

Odd mix of dimentions: 14" X 23" X20mm

Title: Re: Source for Sanden 508
Post by: 450sl on December 06, 2017, 20:24:22

Thanks again