Pagoda SL Group

W113 Pagoda SL Group => Drive train, fuel, suspension, steering & brakes => Topic started by: Markbhai on September 25, 2017, 14:44:18

Title: Pulleys on front of engine
Post by: Markbhai on September 25, 2017, 14:44:18

Hi all.

I am stripping down my engine whilst the body is in the workshop for restoration. I am looking at the pulleys at the front of the engine and struggling to remove them so need some advice.

Power Steering. I have removed the bolt from the front of the pulley but the pulley is not coming off. Does it come off which a knock on the back or do I need a puller?


Main Flywheel. What is the best process for removing this...i am concerned that I might lose top dead centre If I do this wrong.

Water Pump. I am assuming I need a puller for this one...how is it best reassembled?

Thanks in advance.

Mark.

Title: Re: Pulleys on front of engine
Post by: clunker on September 25, 2017, 15:01:14

Here are a few forum posts that I have found useful regarding removing power steering pulley:

https://www.sl113.org/forums/index.php?topic=1660
https://www.sl113.org/forums/index.php?topic=22850
https://www.sl113.org/forums/index.php?topic=10980
https://www.sl113.org/forums/index.php?topic=16839
https://www.sl113.org/forums/index.php?topic=25906