Pagoda SL Group

W113 Pagoda SL Group => General Discussion => Topic started by: Peter h on July 22, 2017, 06:19:14

Title: Seat belt holder
Post by: Peter h on July 22, 2017, 06:19:14

New seat belt holder
Peter.

Title: Re: Seat belt holder
Post by: Pawel66 on July 22, 2017, 07:31:34

Peter, did you buy the brackets anywhere? When I was doing mine, I could not find anything like this, I had to fabricate them myself, buy yours are, I think, better.

Title: Re: Seat belt holder
Post by: Peter h on July 22, 2017, 07:53:17

My friend Roman built  it.  :D
Peter

Title: Re: Seat belt holder
Post by: ohoraherecaptain on July 22, 2017, 15:59:20

Nice work!
JOH.

Title: Re: Seat belt holder
Post by: johnk on July 22, 2017, 22:49:24

very Nice, Love the green interior too!

Johnk

Title: Re: Seat belt holder
Post by: StevenF on August 09, 2017, 00:46:50

Take a look:

https://www.authenticclassics.com/Seat-Belt-Saver-Hook-Mercedes-300SL-350SL-450SL-p/auth-006850.htm
take a look

Title: Re: Seat belt holder
Post by: Pawel66 on August 09, 2017, 07:09:33

Well, attached is mine from ebay (not the belt, just the holder!). I was looking for something not "plastic-like"  but chrome-like for W113.
But I think equally important is the intermediate bracket that you fit in the B pillar anchoring point and then you fit the belt holder to it. To make it look good and be at a proper angle is tricky.

Title: Re: Seat belt holder
Post by: mrfatboy on August 09, 2017, 15:56:11

Quote from: Pawel66 on August 09, 2017, 07:09:33

Well, attached is mine from ebay (not the belt, just the holder!). I was looking for something not "plastic-like"  but chrome-like for W113.
But I think equally important is the intermediate bracket that you fit in the B pillar anchoring point and then you fit the belt holder to it. To make it look good and be at a proper angle is tricky.

Pawel,

Can you provide a part number or eBay listing for that holder?

Title: Re: Seat belt holder
Post by: WRe on August 09, 2017, 16:09:53

Hi,
Pawels look like BMW seat belt holder, e.g. here https://www.amazon.com/Genuine-Seat-Belt-Holders-BMW/dp/B004L1X0E2/ref=sr_1_1?ie=UTF8&qid=1502294705&sr=8-1&keywords=bmw+seat+belt+holder.
I have the same but I'am not very satisfied because the part holding the belt in place separates too easily from the base.
...WRe

Title: Re: Seat belt holder
Post by: mrfatboy on August 09, 2017, 16:12:43

Thanks.  I thought it was those but it was hard to tell for sure from the picture.

Title: Re: Seat belt holder
Post by: Pawel66 on August 09, 2017, 22:04:25

Here is the link.

http://www.ebay.de/itm/Mercedes-W107-W113-Pagode-Gurthalter-Gurtfuhrung-/282600652629?hash=item41cc4fbf55:g:4yAAAOxyhS9Tgd8U

It is not the BMW, it is much simpler pieces. The BMW are listed next to this item.