Pagoda SL Group

W113 Pagoda SL Group => Electrical and Instruments => Topic started by: rbouch8828 on November 16, 2016, 18:05:15

Title: Help Unplugging Connect On Tail Light Bulb Holder
Post by: rbouch8828 on November 16, 2016, 18:05:15

I am trying to unplug the center connector from my right rear tail light bulb holder. The other two connectors were easy, but the one in the center is not. Is there a locking mechanism? This is in a 1970 280SL.

Many thanks,

Roland

Title: Re: Help Unplugging Connect On Tail Light Bulb Holder
Post by: mmizesko on November 17, 2016, 15:11:33

Roland,

Probably just corroded.  no lock. try to pry it with a screwdriver GENTLY.

Mike

Title: Re: Help Unplugging Connect On Tail Light Bulb Holder
Post by: Jonny B on November 17, 2016, 16:34:21

Be careful, I think there is a locking mechanism of sorts. Where you have the arrow pointing on the long side, I think that has to come out just slightly to clear the sides of the second piece.

Title: Re: Help Unplugging Connect On Tail Light Bulb Holder
Post by: rbouch8828 on November 17, 2016, 17:15:58

Thanks, I tried using a screwdriver, but couldn't get it to move.

Title: Re: Help Unplugging Connect On Tail Light Bulb Holder
Post by: cfm65@me.com on November 18, 2016, 11:28:34

Hi Roland,
I have attached a few photos of the cover you are battling with. You should be able to see the barbs holding the cover in position.
Regards
Chris
Cape Town

Title: Re: Help Unplugging Connect On Tail Light Bulb Holder
Post by: rbouch8828 on November 18, 2016, 15:23:55

Hi Chris,

Thanks very much. Somehow, I managed to slide the top cover off then pull out the base and after that, slide the top back on.

I don't know if I damaged the "barbs" you pictured in the process, or not. From your photos, I'm not sure where they attach to the plug.