Pagoda SL Group

W113 Pagoda SL Group => General Discussion => Topic started by: mbzse on October 28, 2016, 14:41:56

Title: Supplementary tool kit dual ring spanner
Post by: mbzse on October 28, 2016, 14:41:56
As you may know, in addition to the tool kit in a Vinyl pouch that was supplied with the Pagoda car when new, there was a Supplementary kit that could be bought separately (from the Dealer).
In that supplementary kit (see pic attached, from M-B tech literature) there were four "straight" dual ring spanners included, size 6 to 14mm.  A picture of the type of spanner is attached (however this one is not from a supplementary kit afaik).
Now, question: Would anyone perhaps know if these dual spanners where marked with"Mercedes-Benz"; like the ones in the in-car kit? Any additional info is appreciated.
/Hans S
Title: Re: Supplementary tool kit dual ring spanner
Post by: Jonny B on October 28, 2016, 15:37:44
Hans,

I have a couple of these kits, one that is unused. The dual ring (box end US terminology) are not marked as MB. The ones in my kits are Walther. A friend of mine in the area (original owner - 250 SL) has the supplementary kit and the wrenches in his kit are also generic, but I do not recall the brand.

FYI - I have a copy of the original dealer price, in the day - US $13.81!
Title: Re: Supplementary tool kit dual ring spanner
Post by: mbzse on October 28, 2016, 16:18:29
Quote from: Jonny B
I have a couple of these kits, one that is unused

Wow, neat  8)

Quote
The dual ring (box end US terminology) are not marked as MB

Ok, good to know. I can then buy generic ones at car meets locally here (Heyco, Dowidat etc.)  What were the sizes?
I would think:

Please adjust the figures (sizes) as appropriate

Title: Re: Supplementary tool kit dual ring spanner
Post by: waltklatt on October 28, 2016, 17:32:43
Also 17-19 is there too.
Title: Re: Supplementary tool kit dual ring spanner
Post by: mbzse on October 28, 2016, 17:52:58
Quote from: waltklatt
Also 17-19 is there too
Certainly so. This bigger dude has different shape though, offset each end
Title: Re: Supplementary tool kit dual ring spanner
Post by: Jonny B on October 29, 2016, 23:10:12
The ones in my kit are:

6-7 mm
8-10 mm
9-11 mm
12-14 mm

And the big offset box end as Walt has indicated.

And the tools are "Walter" not "Walther"
Title: Re: Supplementary tool kit dual ring spanner
Post by: mbzse on October 29, 2016, 23:41:43
Quote from: Jonny B
The ones in my kit are:
Jonny, thanks for this info

Quote
And the tools are "Walter"
That is so, here he is.  Carl Walter established in 1919, in Wuppertal:
http://www.cwalter.de/en/ (http://www.cwalter.de/en/)