Pagoda SL Group

W113 Pagoda SL Group => Body, interior, paint, chrome, and cosmetic items => Topic started by: StevenF on October 15, 2016, 21:32:41

Title: Glovebox Rubber Bumpers
Post by: StevenF on October 15, 2016, 21:32:41

Does anyone know the part # for the little black rubber bumpers inside the glovebox?

If anyone has them, please let me know

Regards
Steven

Title: Re: Glovebox Rubber Bumpers
Post by: Shvegel on October 16, 2016, 10:31:02

Looked it up in EPC.  It looks like part#  110 987 05 39

Title: Re: Glovebox Rubber Bumpers
Post by: StevenF on October 16, 2016, 15:55:56

Shvegal

Thank you for your response. 

Let me know your thoughts on this:
http://www.sl113.org/forums/index.php?topic=14130.msg96133#msg96133

I also found this  : http://www.authenticclassics.com/Rubber-Bumper-Buffer-Plug-10mm-Head-Dia-p/auth-003526.htm

I am confused??
Steven

Title: Re: Glovebox Rubber Bumpers
Post by: Shvegel on October 17, 2016, 10:59:13

It just so happens my glovebox is sitting on my workbench.  I will see if I can post a picture later today.

Title: Re: Glovebox Rubber Bumpers
Post by: StevenF on October 17, 2016, 17:39:54

thank you!

Title: Re: Glovebox Rubber Bumpers
Post by: TJMart on October 17, 2016, 23:05:42

I purchased the bumpers in the link to Authentic Classics and they were too thick when installed. My glove box would close but could not be locked.

Title: Re: Glovebox Rubber Bumpers
Post by: StevenF on October 18, 2016, 01:12:32

Tony--thank you for your response.  Quick question:  although your glove box doesn't lock, is there any gaps?


what are your Thoughts on : http://www.sls-hh-shop.de/230-280SL-R113/68-a-Verkleidungen-Armaturenbrett/?_artperpage=10&listorderby=oxstock&listorder=desc

Title: Re: Glovebox Rubber Bumpers
Post by: TJMart on October 18, 2016, 08:21:24

I had to remove them and use the original ones I had. The glove box would not stay closed and the chrome piece along the top of the box did not line up with the other dash chrome piece because of the large gap. I would purchase the MB part number. The sls part might not work because it looks like it is for the speaker.

Title: Re: Glovebox Rubber Bumpers
Post by: stickandrudderman on October 18, 2016, 13:50:07

I just fitted some MB ones last week. They were available, cheap (relatively.....) and did the job perfectly.

Title: Re: Glovebox Rubber Bumpers
Post by: StevenF on October 18, 2016, 15:06:36

Stick
Please confirm you used this item number
110 987 05 39

Regards
Steven

Title: Re: Glovebox Rubber Bumpers
Post by: stickandrudderman on October 23, 2016, 15:51:46

I'm on holiday but as I recall the picture in EPC is pretty clear.
If it can wait 10 days I'm happy to confirm it then.

Title: Re: Glovebox Rubber Bumpers
Post by: StevenF on October 23, 2016, 17:05:25

Stick,
Thank you--My upholster guy found mine!  I am all good!
Regards
Steven