Pagoda SL Group

W113 Pagoda SL Group => Body, interior, paint, chrome, and cosmetic items => Topic started by: swood1 on August 24, 2016, 18:05:30

Title: Chrome / metal parts - where do they go?
Post by: swood1 on August 24, 2016, 18:05:30

Hi all,

Can anyone help me identify these chrome parts in the attached photos please?

I believe they are all from an SL250 but some could also be 230.

Regards

Steven

Title: Re: Chrome / metal parts - where do they go?
Post by: gordon on August 24, 2016, 20:03:38

I think the first two pieces fit on the front inner edges of the doors to hold the inner door seals in place .   Same as on my 230 sl. Gordon, Staffordshire

Title: Re: Chrome / metal parts - where do they go?
Post by: Garry on August 24, 2016, 21:06:24

Looking at the second photo, there are an assorted lot of chrome and aluminium items from left to right

First two are the A pillar chromed items
second two are from the door board surround,
third two are aluminium pieces from trim on the I think Front right and left guard to door.
fourth are two pieces from the rear valance panel under the boot lid between tail light and boot lock
fifth and sixth pairs are also from around the door card surround,
and the three pieces at the bottom look like two are from the rear left and right side chromed pieces from the door to the rear wheel arch trim the last I am not sure of.
Thats a start.

Title: Re: Chrome / metal parts - where do they go?
Post by: swood1 on August 24, 2016, 21:19:34

Thanks all,

I think I have worked it all out now and packed them accordingly :)

Steve

Title: Re: Chrome / metal parts - where do they go?
Post by: jerrycastillo on December 25, 2016, 12:41:12

Hello Steven,

Are you selling the chrome parts shown in your pictures? If so, I am interested in the two pieces in the first picture (door trim holding the rubber seal at the front of the door) Many thanks!!

Jerry