Pagoda SL Group

W113 Pagoda SL Group => Body, interior, paint, chrome, and cosmetic items => Topic started by: CJHenderson on August 07, 2016, 20:03:04

Title: Removing window spring
Post by: CJHenderson on August 07, 2016, 20:03:04

How do I remove window spring? Window is fully retracted but spring has a lot of tension

Title: Re: Removing window spring
Post by: Cees Klumper on August 07, 2016, 20:15:59

I've done this auccessfully by holding the end tightly with pliers (I think vicegrips) and using some muscle stretching the spring enough to get it past the catch and off.

Title: Re: Removing window spring
Post by: CJHenderson on August 07, 2016, 20:22:25

Ok thanks I'll give it a try

Title: Re: Removing window spring
Post by: 66andBlue on August 07, 2016, 21:16:10

Is the window lifter still in the door?
It is easier to remove the spring when the lifter is out.

Title: Re: Removing window spring
Post by: CJHenderson on August 17, 2016, 02:13:38

It's out thanks

Title: Re: Removing window spring
Post by: Pinder on August 17, 2016, 02:37:45

I've used sheet rock screws to safely remove the springs on my soft top frame. basically screw them in to each thread section until spring expands then it should be easier to remove it. you may need 10 or 20 screws to stretch it.