Pagoda SL Group

W113 Pagoda SL Group => Body, interior, paint, chrome, and cosmetic items => Topic started by: cstinchi on May 11, 2016, 02:56:51

Title: Where do they go?
Post by: cstinchi on May 11, 2016, 02:56:51

Hi Guys,
Putting the 230Sl back together and cannot find a use for these screws and hardware. Any help is appreciated.
Regards,
Caio

Title: Re: Where do they go?
Post by: ja17 on May 11, 2016, 03:54:09

Seat track bolts?

Title: Re: Where do they go?
Post by: cstinchi on May 11, 2016, 04:05:37

Thank you Joe, but it is not. I have all screws from the seats in a different ziplock. On my notes they were together with the front bumper hardware(already installed).
Thanks

Title: Re: Where do they go?
Post by: Naj ✝︎ on May 11, 2016, 09:05:09

Soft top cover hinge uses such clip nuts.

naj

Title: Re: Where do they go?
Post by: cstinchi on May 12, 2016, 02:30:55

HI Naj,
Would you be more specific. I just assembled the soft top cover and did not find any place for it.
Thanks,
Caio

Title: Re: Where do they go?
Post by: Shvegel on May 12, 2016, 09:46:48

They look American to me.  AC condenser?

Title: Re: Where do they go?
Post by: cstinchi on May 14, 2016, 02:31:02

Hi Shvegel,
It could be as my AC is out of the car waiting for me to finish the interior. I'll check the condenser and see if it makes sense.
Take care,
Caio

Title: Re: Where do they go?
Post by: Naj ✝︎ on May 14, 2016, 08:11:07

Quote from: cstinchi on May 12, 2016, 02:30:55

HI Naj,
Would you be more specific. I just assembled the soft top cover and did not find any place for it.
Thanks,
Caio

I got such nuts for my SL a few years ago for the soft top cover hinges.
Sorry, but I could not find them in the epc yesterday.

Naj

p.s: Maybe I got it wrong.

It's this one:

http://www.sls-hh-shop.de/sls/A0009909991-Mutternhalter-A0009909991-Mutternhalter.html

naj

Title: Re: Where do they go?
Post by: Shvegel on May 16, 2016, 17:59:44

AC condenser is under the front bumper.  Since you had them in a bag of front bumper stuff I thought it might be for that.  I thought it might be the condenser as the AC kits are made in the US and the bolts look too coarse to be metric.

Title: Re: Where do they go?
Post by: cstinchi on May 17, 2016, 02:48:08

Thank you Shvegel..it makes sense. Take care