Pagoda SL Group

W113 Pagoda SL Group => Body, interior, paint, chrome, and cosmetic items => Topic started by: Peder on April 07, 2016, 09:19:29

Title: Heater air distributor
Post by: Peder on April 07, 2016, 09:19:29

I have bought a used air distributor for the heater. There are some electrical cores at the right hand side of the box. I wander what purpose they are there for? Se picture.
Is there any who can help?

Title: Re: Heater air distributor
Post by: Naj ✝︎ on April 07, 2016, 13:43:21

Hi,

Its the connector for the glove compartment light.

naj

Title: Re: Heater air distributor
Post by: Peder on April 07, 2016, 14:47:34

Aha. You see, the air distributor was missing when I bougth the var. But the light in the glove box is ok anyway.
Thank for the information.

Title: Re: Heater air distributor
Post by: alchemist on April 10, 2016, 02:24:10

Mine has no connectors on the side of the heater housing. However, Similar connectors do exist out side the housing, on the side of the duct, with 2 electrical wires, one of which is ground and the other goes to the Glove Compartment. If your glove compartment light is working, most likely that you have the same set-up like mine. Then you just ignore the connector on the housing you bought. That means that the housing you bought is different than your original housing.