Pagoda SL Group

W113 Pagoda SL Group => Body, interior, paint, chrome, and cosmetic items => Topic started by: Peder on March 07, 2016, 09:06:01

Title: Heater
Post by: Peder on March 07, 2016, 09:06:01

Last year I bougth a 1964 230SL. It looks great, but the heater is no good. The air distributor is missing, and the wire cables are stuck.

I have now managed to take out the heater core. I have also taken off the cap and the grille on top of the fire wall, and I found that the flaps under were broken.

I now wander if there is someone who can tell me how the draining is working. I have found two holes, one at each side, where the water can drain. But how (or where) do the holes end? How can I see if they er stuck, or wide open of rust?

I'm looking forward to have som advise on the matter.

Title: Re: Heater
Post by: Jowe on March 07, 2016, 12:27:59

Check here: http://www.sl113.org/wiki/ChassisBody/Drains#HeaterDrain

Title: Re: Heater
Post by: Peder on March 07, 2016, 17:34:22

Thank you! That was great help.