Pagoda SL Group

W113 Pagoda SL Group => Body, interior, paint, chrome, and cosmetic items => Topic started by: brad on October 23, 2015, 16:39:16

Title: Hard top locking lever hex nut
Post by: brad on October 23, 2015, 16:39:16

Can anyone advise size and thread on the hard top thin hex nuts that secure the chrome rings (A1137950017)for the hard top locking levers.
Regards Brad

Title: Re: Hard top locking lever hex nut
Post by: waltklatt on October 23, 2015, 19:08:11

Hi Brad,
Not sure, but think its pretty much very similiar to the nut holding the cigarette lighter base to the dash.
Could be a bit thicker and bigger.

Walter

Title: Re: Hard top locking lever hex nut
Post by: brad on October 30, 2015, 21:23:49

For info the nut is M14 fine thread pitch 1mm, half nut, unable to source but I salvaged the old nuts using the correct tap to remove the old seized  threads I had to cut off.
Cheers Brad