Pagoda SL Group

W113 Pagoda SL Group => Drive train, fuel, suspension, steering & brakes => Topic started by: vande17941 on October 21, 2015, 02:04:01

Title: SHIFTER Bushing Play
Post by: vande17941 on October 21, 2015, 02:04:01

230sl Manual....just put new motor mounts and trans mount in. At 4000rpm and above the stick shift is vibrating making noise. I can pull the stick up and down 1/8 of an inch with a definite clunk/tap each time I pull it up/down. Is that too much bushing play and the reason the thing is vibrating at high RPM? Thanks.

Title: Re: SHIFTER Bushing Play
Post by: enochbell on October 21, 2015, 11:25:17

Yep, that is too much play.  Most likely culprit is the clamshell bushing that keeps the ball at the base of the shifter.  It is a fairly easy fix, but while you are in there you should also replace the bushings on the connecting rods.  There is plenty of detail in the threads, good luck!

g

Title: Re: SHIFTER Bushing Play
Post by: vande17941 on October 22, 2015, 04:24:46

Thanks. I got the parts today and will get on it.