Pagoda SL Group
W113 Pagoda SL Group => Body, interior, paint, chrome, and cosmetic items => Topic started by: PMO956F on August 11, 2015, 20:27:58
-
thanks to all , and to Eric who came up trumps - cheers.
Hi all
Ive been desperately looking for a pair for my 67 250sl and have just listed under wanted .. see the shaded out not available ones from the sls catalogue !
Does anyone know if this type were fitted to any other Mercedes as in 67 they seem to be different to any other w113
3 holes but flat plates without raised edges . does anyone have any experience with these ? why wonder did they change them so quickly ?!
Cheers
Darren
-
Take a look here: http://www.sls-hh-shop.de/en/230-280SL-W113/72-Door/72-b-Info-Door-Catch/
This shows all the different catches and what kind of alternatives exist.
-
Hey thanks 66
yes been there there not available im afraid
Thanks
Darren
-
Darren,
correct, but that is why people have replaced them with the 4-hole latches as shown in the diagram.
You need to drill a new pair of holes that is all.
-
Alfred
Thanks for your reply
thats great news then, I hadn't realised that ! will get onto sls tomorrow .
Cheers Darren
-
Darren,
before you buy call SLS and ask whether they provide a template to drill the new holes.
It is not clear whether one pair (upper?) can be reused, or all four need to be drilled new.
-
110 sedans use the same type of latches. Rear doors are always the best choice if you can find them as they're seldom worn out.
-
thanks so much for the tip , happy now as found a pair !
thanks Again, Darren