Pagoda SL Group

W113 Pagoda SL Group => General Discussion => Topic started by: erickmarciano on September 30, 2004, 21:06:08

Title: should the clutch arm move freely when you ....
Post by: erickmarciano on September 30, 2004, 21:06:08

should the clutch arm move freely back and forth when you remove the slave cylinder?


thanks

1971 280sl
1962 VW
1954 Allstate vespa
1958 gs150 vespa
1962 gs160 vespa

Title: Re: should the clutch arm move freely when you ....
Post by: Malc on October 01, 2004, 02:22:32

Yes, because it has to move the release bearing!
However do be careful that it doesn't fall off its pivot point! I had this happen to me on another car and only by luck and a lot of swearing I was able to get it back on without taking the box out
Malc