Pagoda SL Group

W113 Pagoda SL Group => Electrical and Instruments => Topic started by: rutger kohler on March 04, 2015, 06:30:32

Title: Cold Start valve electrical feed on 1969 280SL
Post by: rutger kohler on March 04, 2015, 06:30:32

Hi, The solenoid valve I am referring to is the the one mounted on the inlet manifold that squirts the initial petrol/gas into the manifold.  In the wiring diagram in the technical manual, and other literature it is suggested this has a relay. If so where is this located please, or the the electrical feed direct from terminal 50 on the ignition switch?

Title: Re: Cold Start valve electrical feed on 1969 280SL
Post by: rutger kohler on March 04, 2015, 07:46:57

Think this has been answered by Peter Van Es in the post before this thanks.