Pagoda SL Group

W113 Pagoda SL Group => Drive train, fuel, suspension, steering & brakes => Topic started by: jpinet on January 29, 2015, 22:20:56

Title: Missing spring in distributor housing or not?
Post by: jpinet on January 29, 2015, 22:20:56

There is a spring # 127 993 01 01 that sits on the helical gear # A 127 158 01 12 in the main distribution housing
In the epc, it says ‘As of engine 982 004179’. My engine is 981 006883.
Am I right to think I should not have this spring?
I dropped the helical gear out of the housing and could not see if there was a spring there that would have bounced off somewhere in the depths of my garage

Do I need it?

Thanks!

Title: Re: Missing spring in distributor housing or not?
Post by: jpinet on January 30, 2015, 03:06:19

Seems I need it!

Title: Re: Missing spring in distributor housing or not?
Post by: 114015 on January 30, 2015, 18:09:45

Hello jp (again),

Yes,
that's correct. You need the spring here.
The EPC is sometimes a bit mystic on this since it today covers listings for more than one (M127) engines.
The old paper parts book was far more unambiguous on this.


Achim

Title: Re: Missing spring in distributor housing or not?
Post by: mbzse on January 30, 2015, 18:36:59

Quote from: jpinet

../... am I right to think I should not have this spring?

Distributor housing spring, and its purpose in the M-B design, is discussed in this thread
http://www.sl113.org/forums/index.php?topic=4098.0 (http://www.sl113.org/forums/index.php?topic=4098.0)
/Hans in Sweden
.

Title: Re: Missing spring in distributor housing or not?
Post by: jpinet on January 30, 2015, 20:39:43

All very helpful! Thanks guys!