Pagoda SL Group
W113 Pagoda SL Group => Drive train, fuel, suspension, steering & brakes => Topic started by: 450sl on January 01, 2014, 12:18:48
-
Can anyone tell me what the use of these switches is?
Cant find them on my Diagram either...
Mark
-
Mark,
These are switches used for the emission controls that are used in the North American market.
Jack
-
Thanks Jack,
have removed the switches but the connectors are still in place under the car.
I would like to remove the wiring loom as well .so a Diagram witch refers to these switches would be handy....
Do you have this diagram or do You know where tp find?
Mark
-
Hi Mark,
The information you seek is on the MB CD. Its a little hard to find.
If you can't find it or don't have the CD send me an email at jclute2012@gmail.com and I'll mail it to you.
Br,
Jeff
-
Mark,
The diagram is in the big blue book but I currently am not able to attach. If you do not get this by the weekend I will scan and attach.
Jack
-
Is it on this page: http://www.sl113.org/wiki/Electrical/EmissionControlSystem
-
Thanks Jeff , Jack and Peter
Jeff, i have sent You an email. thanks in advance.
Jack ,i have the BBB but i cannot find the right diagram...
Peter: your link is the automaticversion diagram and without all the components in the legenda, but suppose the switches are no 34 and 35 , and the reverse switch 36 .
Mark
-
These switches are only found on standard trans cars. There's a switch for fourth gear and one for third gear. When you're coasting down hill, or from a higher speed, they will turn the injection pump to the off position. The reverse light switch is on a seperate harness.
-
Mark,
The diagram for the 280SL manual transmission emissions is on page 00-78/3 of the BBB.
Jack