Pagoda SL Group

W113 Pagoda SL Group => Drive train, fuel, suspension, steering & brakes => Topic started by: dirtrack49 on December 26, 2013, 17:17:41

Title: Fuel Hose Seal
Post by: dirtrack49 on December 26, 2013, 17:17:41

Hi All,

Replacing fuel hoses on my 66 230SL.
Can anyone tell me the size of seal that seals off the banjo fitting at the fuel dampner? Does it require two seals, aluminium or copper? Is there a part number?
Thanks,
Tom L.

Title: Re: Fuel Hose Seal
Post by: bsimaz on December 26, 2013, 21:01:28

banjo fittings always require two washers.  One on each side of the fitting.  Usually aluminium.

Title: Re: Fuel Hose Seal
Post by: dirtrack49 on December 28, 2013, 14:33:51

Thanks bsimaz for the info.

I found out the size is 14mm x 20mm x 1.5mm aluminium seal. And yes, it requires two seals.

Thanks again,

Tom L.